Home > Cleaning Supplies > Bore Cleaning Jags
The cleaning jags for sale here were proudly invented by master Gunsmith David Dentico.  David Dentico is the owner of The Custom Shop Gun Shop in Walworth New York.  We proudly certify that 100% of our product is made and assembled in the US.  These jags are the finest cleaning tools you will ever use.  They dramatically cut down on mess, smell, expense and cleaning time.
Sort By:
Page of 2
TCS 17 Caliber Patch Jag Combo. TCS AR-10 upper receiver.  "The Proof is On The Patch" TCS AR-15 M4, M16 upper receiver and buffer tube jag The Proof is On The Patch
Our 17 caliber patch jag is designed specifically for cleaning 17 caliber barrels, including but not limited to, 17 Mach 2, 17 HMR, .17 WSM.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 5x40 threads. Our Ar-10, cleaning jag is made specifically for cleaning the Upper Receiver on these guns. It is made with pride in the USA. These patch jags press the patch that has been treated with solvent against the upper receiver to mechanically strip out debris that could inhibit your guns smooth functioning. These Jags are the only jag on the market designed to clean AR-10 Upper Receivers.
Our Ar-15, M16, M4, cleaning jag is made specifically for cleaning the
Upper Receiver and Buffer Tube on these guns. It is made with pride in
the USA. These patch jags press the patch that has been treated with
solvent against the upper receiver or buffer tube to
mechanically strip
out debris that could inhibit your guns smooth functioning. These Jags
are
the only jag on the market designed to clean AR-15 Upper Receivers and
Buffer Tubes
TCS 20 Caliber Patch Jag. Our 50 Caliber patch jag is designed specifically for cleaning .50 caliber barrels, including but not limited to 500 S&W, 50 BMG, 50 Alaskan, 50/70, 50 Beowolf. TCS 17 Caliber Patch Jag.
TCS 20 Caliber Patch Jag
Sale Price: $11.99
TCS 50 Caliber
Sale Price: $11.99
TCS 17 Caliber Patch Jag
Sale Price: $11.99
Our 20 caliber patch jag is designed specifically for cleaning 20 caliber barrels, including but not limited to, 17 Mach 2, 17 HMR, .17 WSM.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 5x40 threads. Our 50 Caliber patch jag is designed specifically for cleaning big bore guns like the 50 AE, 500 Smith and Wesson and 50 BMG, 50 Beowulf, 50 Alaskan and the 50/70. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-.45 caliber rfiles and pistols. TCS round patches are the perfect size for use with this jag, and other patches may cause fit problems. Square patches should not be used with our jags. Cleaning Jag Instructions Our 17 caliber patch jag is designed specifically for cleaning 17 caliber barrels, including but not limited to, 17 Mach 2, 17 HMR, .17 WSM.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 5x40 threads.
TCS 10 Gauge Patch Jag The Proof is On The Patch Our 8MM caliber patch jag is designed specifically for cleaning 8mm and 32 caliber barrels, including but not limited to, 8mm Mauser, 8mm Rimmed, 32 Winchester, 8mm Mannlicher, 8mm Swedish, 8mm Remington MagnuM. Our 375 caliber patch jag is designed specifically for cleaning 375 caliber barrels, including but not limited to, .375 H&H. .375 Whelen, 378 weatherby, 38-50, 38-55 Win, 38-56 Win, 38-70 Win, 38-72 Win, 38-90 Win, 9.5x47R, 9.5x73
Our 10 gauge shotgun patch jag is designed specifically for cleaning 10 gauge shotgun barrels. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads. Our 8mm patch jag is designed specifically for cleaning 8mm and 32 caliber barrels, including but not limited to, 8mm Mauser, 8mm Rimmed, 32 Winchester, 8mm Mannlicher, 8mm Swedish, 8mm Remington Magnum. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Note: Two versions of this jag were produced. Due to machining and tooling considerations, the design was changed from aluminum to brass, and the body of the jag was tapered. If you have one of the old aluminum jags, please continue to use it. You will see no difference in performance. If you order a new jag from us, depending on which box your order is drawn from, you may receive either an aluminum Jag or a brass jag. This makes no difference in performance. In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-45 caliber. TCS round patches are the perfect size for use with this jag, and other patches may cause fit problems. Square patches should not be used with our jags. Cleaning Jag Instructions Our 375 caliber rifle patch jag is designed specifically for cleaning 375 H&H. .375 Whelen, 378 weatherby, 38-50, 38-55 Win, 38-56 Win, 38-70 Win, 38-72 Win, 38-90 Win, 9.5x47R, 9.5x73.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
TCS .7mm/ 284 Caliber Rifle Patch Jag The proof is on the patch TCS .270/ 6.8 mm Rifle Patch Jag. The proof is on the patch. TCS .25/ 6.5mm Rifle Patch Jag The proof is on the patch
Our 7mm/ .284 caliber rifle patch jag is designed specifically for cleaning 7mm caliber barrels, including but not limited to .280 Remington, 284 Winchester, 7mm-08, 7mm Rem Mag, 7mm Wetharby Mag, 7mm Bench Rest, 7mm Short Mag.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our .270/ 6.8mm caliber patch jag is designed specifically for cleaning 270 caliber barrels, including but not limited to, .270 win, .270 WSM, 270 Weatherby, and 6.8 Remington.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our .25 caliber/ 6.5mm caliber patch jag is designed specifically for cleaning 25 caliber barrels, including but not limited to .25-06, .25-20, .250 Savage, 257 Roberts, .257 Wethaerby, 264 Rem, 6.5x55SM, and 6.5 Rem.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
TCS 6mm/243 Caliber rifle Patch Jag.  The proof is on the patch.  Our 6mm/243 caliber patch jag is designed specifically for cleaning 243 caliber barrels, including but not limited to, 6mm Remington, .243 winchester, 240 weatherby, and .244 remington TCS 22 Caliber Patch Jag.  The proof is on the patch Our 22 caliber patch jag is designed specifically for cleaning 22 caliber barrels, including but not limited to, 22 LR, 22 Magnum, .22 Hornet, .222, .223, and 22-250. Our 50 caliber patch jag is designed specifically for cleaning 50 caliber muzzleloader barrels
TCS 22 Caliber Patch Jag
Sale Price: $11.99
Our 243/6mm caliber patch jag is designed specifically for cleaning 243 caliber barrels, including but not limited to 6mm Remington, .243 Winchester, .240 Weatherby, and .244 Remington.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our 22 caliber patch jag is designed specifically for cleaning 22 caliber barrels, including but not limited to, 22 LR, 22 Magnum, .22 Hornet, .222, .223, and 22-250.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
Our 50 caliber patch jag is designed specifically for cleaning 50 caliber muzzleloader barrels. These jags should only be used in guns with removable breech plugs. They may work in other muzzleloaders, but it is sometimes difficult to reverse direction with this jag, especially if the barrel is rough or pitted, and this makes it difficult or impossible to remove this jag from a muzzleloader that does not have a removable breech plug. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 10x32 threads.
TCS 16 Gauge Patch Jag The Proof is On The Patch Our 45 Caliber patch jag is designed specifically for cleaning .45 caliber barrels, including but not limited to .45 ACP, .45 GAP, .460 SW, .45 Win Mag, .454 Casull. Our 44 Caliber patch jag is designed specifically for cleaning .44 caliber barrels, including but not limited to 44 Magnum, 44 Special, 444 Marlin.
Our 16 gauge shotgun patch jag is designed specifically for cleaning 16 gauge shotgun barrels. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads. Our 45 Caliber patch jag is designed specifically for cleaning .45 caliber barrels, including but not limited to .45 ACP, .45 GAP, .460 SW, .45 Win Mag, .454 Casull.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.

In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-.45 caliber rfiles and pistols. Square patches should not be used with our jags.
Our 44 Caliber patch jag is designed specifically for cleaning .44 caliber barrels, including but not limited to 44 Magnum, 44 Special, 444 Marlin.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.

In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-.45 caliber rfiles and pistols. Square patches should not be used with our jags.
Our 40 Caliber.10mm patch jag is designed specifically for cleaning .40 caliber barrels, including but not limited to 40S&W, 10mm, 41 mag, 400 Corbon 41 Action Express. Our 9mm-.358 caliber patch jag is designed specifically for cleaning 9mm-.358 caliber barrels, including but not limited to 9mm, 38 spl, 357 mag,38 Super, 35 Rem, 35 Whelen, 356 Win. Our 338 caliber patch jag is designed specifically for cleaning 338 caliber barrels
Our 40 Caliber.10mm patch jag is designed specifically for cleaning .40 caliber barrels, including but not limited to 40S&W, 10mm, 41 mag, 400 Corbon 41 Action Express.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our 9mm-.358 caliber patch jag is designed specifically for cleaning .358 caliber barrels, including but not limited to 9mm, 38 spl, 357 mag,38 Super, 35 Rem, 35 Whelen, 356 Win.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our 338 caliber patch jag is designed specifically for cleaning .338 caliber barrels.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
Our 30 caliber patch jag is designed specifically for cleaning 30 caliber barrels, including but not limited to, 30 Carbine, 308, 30-06, 300, 303, 32 Win, 32 ACP, 32 H&R, .327, 32 Rim. TCS 28 Gauge Patch Jag The Proof is On The Patch TCS 20 Gauge Patch Jag The Proof is On The Patch
Our 30 caliber rifle patch jag is designed specifically for cleaning 30 caliber barrels, including but not limited to30 Carbine, 308, 30-06, 300, 303, 32 Win, 32 ACP, 32 H&R, .327, 32 Rim .  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our 28 gauge shotgun patch jag is designed specifically for cleaning 28 gauge shotgun barrels. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads. Our 20 gauge shotgun patch jag is designed specifically for cleaning 20 gauge shotgun barrles. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads.
TCS 410 Gauge Patch Jag The Proof is On The Patch TCS 12 Gauge Patch Jag The Proof is On The Patch Replacement O-rings for TCS 20 cal Rifle Cleaning Jags
TCS 410 Shotgun Patch Jag
Sale Price: $11.99
TCS 12 Gauge Shotgun Patch Jag
Sale Price: $11.99

(1)
Our 410 gauge shotgun patch jag is designed specifically for cleaning 410 gauge shotgun barrles. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads. Our 12 gauge shotgun patch jag is designed specifically for cleaning 12 gauge shotgun barrels. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads. Many of our satisfied customers have asked us to sell extra O-rings in case they damage one.  We have listened and now carry this handy package of 6 O-rings for our 20 cal Shotgun
Replacement O-rings for TCS 375 Caliber Cleaning Jags Replacement O-rings for TCS 17 cALIBER jAGS Replacement O-rings for TCS 20 Gauge Shotgun Mag Tube Cleaning Jags
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one.  We have listened and now carry this handy package of 10 O-rings for our 338 Caliber Patch Jag. Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 6 O-rings for our 17 Call Jag
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 6 O-rings for our 20 Gauge Shotgun Mag Tube