Home > Cleaning Supplies > AR Cleaning supplies
Cleaning Supplies designed specifically for the immensely popular AR-15 platform. These supplies include special bore guides, gas tube guides, gas tube cleaners, locking lug cleaners, and chamber rods.
Sort By:
Page of 1
TCS Manufacturings's Ultimate AR Cleaning Kit TCS 44"Stainless Steel Cleaning Rod TCS Manufacturing Ar-10 Bore Guide
TCS Manufacturing's AR Cleaning Kit is the last cleaning kit you will
ever need to buy.  This is the ultimate cleaning kit for cleaning every
single piece and part of the AR rifle platform. No other kit is this
complete, or cleans so much of the gun.
This Custom Rod Is Made To Order, may take 1-2 weeks for delivery.
TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods can be made in custom lengths This 44" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes. For best results, we recomend you use it with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
This tool keeps the cleaning rod perfectly straight so that it can not make contact with the sides of your barrel.
TCS Manufacturing Ar-15 Bore Guide AR BARREL EXTENSION LUG RECESS CLEANING TOOL TCS 28"Stainless Steel M-4 Cleaning Rod
This tool keeps the cleaning rod perfectly straight so that it can not make contact with the sides of your barrel. The AR-15, Ar-10 or Modern Sporting Rifle, is one of the finest firearms
ever made.  Still, it is difficult to clean without the right tools.  
Until now, you have never the right tool, because we just invented it.
This revolutionary new tool is the only tool on the market that allows
you to clean the barrel extension lug recess on an AR-15 or an AR-10.  
Use TCS Tactical Cleaning Solvent and TCS Shotgun patches with this
Tool.  This tool also works well for most bolt action rifles
TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods come in two sizes: 28" which is perfect for M4 Carbines and 36" which is perfect for longer bolt action rifles.  This  28" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use.  It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes.
For best results, we recommend you use it with TCS Jags and USP Bore Paste listed below.  With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
TCS 20"Stainless Steel Cleaning Rod TCS 18"Stainless Steel Cleaning Rod TCS 36" Stainless Steel Rifle Cleaning Rod
This Custom Rod Is Made To Order, may take 1-2 weeks for delivery.
TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods can be made in custom lengths This 20" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes. For best results, we recomend you use it with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
This Custom Rod Is Made To Order, may take 1-2 weeks for delivery.
TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods can be made in custom lengths This18" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes. For best results, we recomend you use it with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
TCS 30 Caliber & Larger, Stainless Steel Rifle Cleaning rods come in two sizes: 28" which is perfect for M4 Carbines and 36" which is perfect for longer bolt action rifles. This 36" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes. For best results, we recommend you use this rod with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
TCS 28" Stainless Steel Rifle Cleaning Rod TCS 36" Stainless Steel Rifle Cleaning Rod TCS Manufacturing Ar Upper Receiver & Buffer Tube
TCS 30 Caliber & Larger, Stainless Steel Rifle Cleaning rods come in two sizes: 28" which is perfect for M4 Carbines and 36" which is perfect for longer bolt action rifles. This 28" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes.

For best results, we recommend you use this rod with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.


TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods come in two sizes: 28" which is perfect for M4 Carbines and 36" which is perfect for longer bolt action rifles. This 36" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes. For best results, we recommend you use this rod with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS. The revolutionary TCS Manufacturing AR Upper Receiver & Buffer Tube Rod employees innovative dual thread technology.  It is threaded for both 5/16x27 tpi and 8x32 tpi.  The innovative dual thread technology in this rod allows you to
clean the upper receiver and the buffer tube with the TCS Manufacturing
AR-15 Jag, and then clean the chamber with the TCS Manufacturing AR-15
Cleaning Brush.  The handy 16" length provides clearance for all length
buffer tubes.
TCS Manufacturing Gas Tube Cleaning Guide TCS 17 Caliber Patch Jag Combo. TCS 8" AR-15 Non Rotating Chamber Rod
The TCS Manufacturing Gas Tube Cleaning Guide properly aligns the Gas
Tube Cleaner with the Gas Tube.  It makes it easy to clean the gas tube,
and prevents dirt, oil, and solvent from falling in the action, while
speeding up cleaning and preventing damage to the gas tube.
Our 17 caliber patch jag is designed specifically for cleaning 17 caliber barrels, including but not limited to, 17 Mach 2, 17 HMR, .17 WSM.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 5x40 threads. This product is the perfect length to clean the locking lugs in an AR-15 receiver. It has a non rotating shaft that makes it easy to twist the cleaning tool inside the locking lugs for easy cleaning. It has standard 8/32 threads and can be used with a wide variety of chamber brushes and cleaning stars.
TCS AR-10 upper receiver.  "The Proof is On The Patch" TCS AR-15 Gas Tube Cleaners TCS AR-15 M4, M16 upper receiver and buffer tube jag The Proof is On The Patch
Our Ar-10, cleaning jag is made specifically for cleaning the Upper Receiver on these guns. It is made with pride in the USA. These patch jags press the patch that has been treated with solvent against the upper receiver to mechanically strip out debris that could inhibit your guns smooth functioning. These Jags are the only jag on the market designed to clean AR-10 Upper Receivers.
TCS Full Size AR 15 Gas Tube Cleaners  are the only gas tube cleaners
long enough to reach the entire length of the Gas Tube.  A full 24
inches long.
Our Ar-15, M16, M4, cleaning jag is made specifically for cleaning the
Upper Receiver and Buffer Tube on these guns. It is made with pride in
the USA. These patch jags press the patch that has been treated with
solvent against the upper receiver or buffer tube to
mechanically strip
out debris that could inhibit your guns smooth functioning. These Jags
are
the only jag on the market designed to clean AR-15 Upper Receivers and
Buffer Tubes
TCS 20 Caliber Patch Jag. TCS 17 Caliber Patch Jag. Our 8MM caliber patch jag is designed specifically for cleaning 8mm and 32 caliber barrels, including but not limited to, 8mm Mauser, 8mm Rimmed, 32 Winchester, 8mm Mannlicher, 8mm Swedish, 8mm Remington MagnuM.
TCS 20 Caliber Patch Jag
Sale Price: $11.99
TCS 17 Caliber Patch Jag
Sale Price: $11.99
Our 20 caliber patch jag is designed specifically for cleaning 20 caliber barrels, including but not limited to, 17 Mach 2, 17 HMR, .17 WSM.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 5x40 threads. Our 17 caliber patch jag is designed specifically for cleaning 17 caliber barrels, including but not limited to, 17 Mach 2, 17 HMR, .17 WSM.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 5x40 threads. Our 8mm patch jag is designed specifically for cleaning 8mm and 32 caliber barrels, including but not limited to, 8mm Mauser, 8mm Rimmed, 32 Winchester, 8mm Mannlicher, 8mm Swedish, 8mm Remington Magnum. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Note: Two versions of this jag were produced. Due to machining and tooling considerations, the design was changed from aluminum to brass, and the body of the jag was tapered. If you have one of the old aluminum jags, please continue to use it. You will see no difference in performance. If you order a new jag from us, depending on which box your order is drawn from, you may receive either an aluminum Jag or a brass jag. This makes no difference in performance. In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-45 caliber. TCS round patches are the perfect size for use with this jag, and other patches may cause fit problems. Square patches should not be used with our jags. Cleaning Jag Instructions
Our 375 caliber patch jag is designed specifically for cleaning 375 caliber barrels, including but not limited to, .375 H&H. .375 Whelen, 378 weatherby, 38-50, 38-55 Win, 38-56 Win, 38-70 Win, 38-72 Win, 38-90 Win, 9.5x47R, 9.5x73 TCS 22 Caliber Patch Jag.  The proof is on the patch Our 22 caliber patch jag is designed specifically for cleaning 22 caliber barrels, including but not limited to, 22 LR, 22 Magnum, .22 Hornet, .222, .223, and 22-250. Our 30 caliber patch jag is designed specifically for cleaning 30 caliber barrels, including but not limited to, 30 Carbine, 308, 30-06, 300, 303, 32 Win, 32 ACP, 32 H&R, .327, 32 Rim.
TCS 22 Caliber Patch Jag
Sale Price: $11.99
Our 375 caliber rifle patch jag is designed specifically for cleaning 375 H&H. .375 Whelen, 378 weatherby, 38-50, 38-55 Win, 38-56 Win, 38-70 Win, 38-72 Win, 38-90 Win, 9.5x47R, 9.5x73.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our 22 caliber patch jag is designed specifically for cleaning 22 caliber barrels, including but not limited to, 22 LR, 22 Magnum, .22 Hornet, .222, .223, and 22-250.  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads. Our 30 caliber rifle patch jag is designed specifically for cleaning 30 caliber barrels, including but not limited to30 Carbine, 308, 30-06, 300, 303, 32 Win, 32 ACP, 32 H&R, .327, 32 Rim .  These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
TCS AR-15 Gas Tube Cleaners TCS Manufacturing 2 AR-15 Gas Tube Guide Liners Armorers Brush 7" Double Ended OD Green
TCS Full Size AR 15 Gas Tube Cleaners  are the only gas tube cleaners long enough to reach the entire length of the Gas Tube. A full 18" long. These TCS Manufacturing Replacement Liners for the Gas Tube Cleaning
Guide help prevent dirt, oil, and solvent from falling into the action.
If your current Cleaning Guide Liner is cracked or dirty, simply slide
it out and replace the liner with a new one.
OD Green Double Ended 7" Amorer's Brush